FWHM Properties

FWHM Properties control Full Width at Half Maximum ("FWHM") measurements of point sources. These properties can be changed globally, to make default settings for new image windows, or locally, to affect FWHM measurements only in the specific window. The default properties dialog uses a profile control to save and recall parameter sets for use by future image windows. Local properties affect only the specific Image Window for which they are changed.

Open these dialogs using the View > Default Properties > FWHM command and the View > Local Properties > FWHM command.

FWHM Properties
Profile [\|>]	Selects the parameter profile for this command and allows you to save or work with existing presets.
FWHM Properties
Fitting Radius	Sets the radius over which a PSF (Moffat or Gaussian) function is fit.
Auto Centroid	Check this box to cause the FWHM to be computed using a centroid position as its center. If not checked, the FWHM value uses the image cursor position as its center.
[Advanced]	Opens the PSF Fit Properties dialog for setting advanced fitting properties. See below.
Centroid Properties
Centroid on	Selects the direction of intensity profile used for calculating centroid positions. This is measured from the pixel values and is not affected by the choice of display settings, such as the palette or contrast.
Positive Points Negative Points	Selects whether to centroid on positive-going values (peaks) or negative-going values (valleys).
Sample Radius	Defines the distance from the target point within which pixel data are used to compute the centroid position. A reasonable radius value is approximately half the diameter of a point source image.
Tracking Radius	Defines the maximum distance from the current position that Mira will search in the next image to lock onto a new position. This is only used when tracking objects through an Image Set.

Related Topics